Topeak's CageMount is an easy way to attach an additional water bottle cage to your handlebar or seat post. Provides convenient access to an extra water bottle during extended commutes or when cycling in warmer weather.
$19.99 - $22.00
- 2/2.5/3/4/5/6/8mm hex key wrench - Spoke wrench (3.2mm) - +/- screwdriver
- 2-in-1 cotterless crank tool for standard square type and Shimano splined octalink and ISIS
The Trident is a patented, award-winning, 2-in-1 master link pliers. Easy to use and built to last. Allows for the master link to be installed and removed by hand.
$13.00 - $15.00
TB-1065: For Shimano® cartridge B.B. & ISIS drive compatible. Use with 1/2” Dr. driver and 24mm wrench. TB-1065 can be turned with TB-8830. TB-1075: For Shimano® & lSlS drive compatible. Use with 1/2” Dr. air driver.
Commonly referred to as the "4th Hand". The Cable Stretcher pulls cables tight with ease.
2-in-1 chain wear checker and chain hook function.
Freewheel turner for 1/8" fixed gear cogs
TB-89911A is made from aluminum and is used to install or remove crank arm adjustment caps. For Shimano and Truvativ.
TB-1090: For 30 mm diameter freewheel, Use with 24mm spanner. TB-1095: For 1.375" diamter freewheel, Use with 24mm spanner
$5.99 - $10.00
TB-1085: Removes Shimano® MF freewheels. Use with 21mm wrench or 1/2” Drive ratchet wrench. TB-1045: Removes Shimano® MF freewheels . Use with an adjustable” or 24 mm wrench. Available to work with TB-FW10 or TB –FW20 while disassembling. TB-1045 can be turned with TB-8830.
Heat treated and made to last. For 3.2, 3.3, and 3.5mm nipples.
- Set includes one 8mm hex socket and ball-end wrench sizes from 4mm through 6mm. - Compact enough to carry on a ride. - Includes durable plastic wrench holder
Use on 8, 9, 10 speed and BMX/Fixie chains (3/32" and 3/16").
- High quality bracket rool, easily assemble the lockring of bottom brackets - Fits most lock-rings
Great tool for riders and home enthusiasts to remove pedals. 15mm wrench size.
$14.00 - $15.00
Professional hub cone wrenches available in multiple sizes.
- For use with most Shimano hubs - Use with 24mm wrench or 1/2" Dr. wrench
SRAM's Disc Brake Bleed Kit has everything you need to ensure your brakes are dialed. The kit is compatible with SRAM X0, XX, Guide, and HydroR brakes. It is not compatible with RockShox' fork bleed kit. Includes the following: • 2 syringes/fittings • bleed blocks • Torx tool • Crow's foot • Bleeding Edge Fitting • DOT 5.1 hydraulic fluid
Park's BBT-18 is a heavy duty, investment cast tool for installing and removing all Shimano, ISIS Drive, and ISIS Overdrive 8-notch bottom bracket cups.
Cleans bicycle chain quickly, easily, and effectively — without the hassle and mess of removing the chain from the bike. The Cyclone uses a large solvent reservoir, hundreds of rotating bristles, and a two-step cleaning process to get chains really clean, improve shifting performance, and extend the life of the chain and other expensive drivetrain parts. - Works with all multi-speed bikes (5, 6, 7, 8, 9, 10, 11, and 12-speed) as well as some single-speed models and e-bikes - Strong magnet at the bottom of the fluid reservoir holds metallic particles scrubbed from the chain - Special wicking sponge draws solvent from the chain as it exits, minimizing drips and mess - Sturdy handle makes the Cyclone easy to use and control - Holds 2 fluid ounces (59ml) of solvent
Heat-treated alloy tool steel, one inch base fits wrench or bench vise. Thin-wall construction allows use without removal of cones and locknuts. The FR-5 has 12 splines that are approximately 23.4mm across. - Fits Shimano, SRAM, Sunrace, Suntour, Chris King and other cassette lockrings - Fits the SRAM XX1 11-speed cassettes - Also fits Shimano disc brake lockrings - Always use a quick-release skewer to hold the tool in place and snug to cogs when loosening; for solid axles, use the axle nut
The Park Tool FR-5.2GT is designed specifically for use when removing and installing cassette lockrings from thru axle hubs. -Utilizes a 12mm guide pin to stabilize the tool during use - Fits 12-spline cassette lockrings from Shimano, SRAM (including 1x), SunRace, SunTour, Chris King and others (23.5mm diameter) - Fits some Shimano and similar disc brake rotor lockrings
Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. The FR-5.2G has 12 splines that are approximately 23.4mm across. - Fits Shimano, SRAM, SunRace, SunTour, Chris King and other cassette lockrings - Fits the SRAM XX1 11-speed cassettes - Also Fits Shimano disc brake lockrings - Guide pin stabilizes tool
Park's Compact Crank Puller is used to remove Shimano Octalink, ISIS Drive and square-taper cranksets. It includes 2 rotating tips (16.3 and 11.3mm) to make the job easy. This is a great tool for your travel and home tool kit.
Park's Double-Ended Cone Wrenches are designed for home mechanics. They're made of thin tool steel to fit the low-clearance adjusting nuts and cone flats on a variety of bearing assemblies. Each wrench is chrome plated for long life and available in popular combinations from 11 to 18mm. Most applications require a pair of cone wrenches. Call or stop by. We can recommend the correct sizes for your needs.
The Park FR-3 Freewheel Remover fits SunTour four-notch freewheels. It's built thin so that removing axle parts is unnecessary. And, it's constructed of durable heat-treated steel.
The Park FR-6 Freewheel Remover fits most 4-notch BMX and singlespeed freewheels. It can be held with a wrench or vise and its narrow profile allows use without removal of cones and locknuts.
The Park FR-7 Freewheel Remover fits Falcon freewheels. It's built thin so that removing axle parts is unnecessary. And, it's constructed of durable heat-treated steel.
Park's FR-8 Freewheel Remover fits flip-flop BMX hubs with 30 x 1mm threads. It can be held with a wrench or vise, and its narrow profile allows use without removal of cones and locknuts.
Page 1 of 2 Next page